Guide
How to organize a salvage yard lot
Divide the property into a handful of named zones that match what actually happens to a car — intake, ready inventory, parts, hold, crush, and overflow — then number rows and stalls inside each zone so any location can be spoken aloud over a radio. Record the VIN and the location at the gate, and update the record every time a car moves.
Start with zones, not with rows
A zone is a stage in the car's life on your property, and it is the layer that stays stable while individual cars come and go. Rows and stalls describe where a car is; zones describe what should be happening to it, which is what someone is really asking when they say they cannot find it.
Most yards converge on a similar set. Keep the names short enough to paint on a sign and say on a radio, and resist adding a seventh and eighth zone until the first six are being used correctly.
| Zone | What belongs there |
|---|---|
| Intake | Just arrived. Not yet drained, photographed, or entered. Should be the emptiest zone on the yard at close of business. |
| Ready | Processed and available: fluids handled, VIN recorded, parts sellable or the car retail-ready. |
| Parts | Actively being pulled from. Expect these to be moved, stacked, or partially stripped. |
| Hold | Legal, insurance, or police holds. Nothing here gets touched, and every unit needs a review date. |
| Crush | Done. Staged for the crusher or the outbound load, with paperwork cleared. |
| Overflow | Everything that would otherwise be parked wherever it fit. Better a named overflow zone than an unnamed one. |
Number rows and stalls so anyone can read them
Use letters for rows and numbers for stalls, and paint them on something the machinery will not knock over. A location like Row B, stall 14 can be repeated over a radio without being spelled out, which is the entire point.
Keep aisles wide enough for a wrecker or forklift to pass a parked car without a three-point turn, and orient rows so drivers can see down them from the main lane. Cars parked nose-in with the VIN plate facing the aisle save the walk around the vehicle later.
Handle fluids and hazards before the car is parked
Drain fluids as part of intake, not later. Fuel, oil, coolant, brake and transmission fluid, and refrigerant all have handling requirements, and a car that has been sitting on dirt for three weeks with a cracked pan is a much larger problem than one that was drained at the gate.
Batteries, airbag modules, mercury switches, and tires generally have their own disposal rules. The specifics vary by state and locality, so build your routine around your own regulator's requirements rather than a generic checklist.
Build an intake routine that survives a busy day
The single decision that determines whether the yard stays organized is whether every car gets recorded at the gate. Make that step short enough that nobody skips it during a rush.
- Scan or record the VIN before the car leaves the drive lane.
- Photograph the car, including damage and any missing panels.
- Enter year, make, model, and where the car came from.
- Note any hold, along with the date the hold can be reviewed.
- Assign the zone and stall, and say it out loud to the driver.
Storage and hold periods before a vehicle can be processed or disposed of are set by state law and vary widely, so put the review date in the record rather than trusting anyone to remember it.
If you can only enforce one rule, enforce the VIN capture. Plates change, colors get repainted, and a make and model is not unique on a yard with forty of them. The VIN is the only handle that survives everything.
Keep the record accurate as cars move
Lot maps do not go stale because of intake, they go stale because of movement. Every car pulled to the parts area, restaged for a customer, or shifted to make room is a chance for the written location to become fiction, and stale locations are worse than no locations because people trust them.
The durable fixes are cultural and structural: a fixed rule that no car moves without the record moving with it, a periodic walk of one zone at a time rather than an annual whole-yard audit, and a location scheme with enough stalls that nobody has to invent a spot.
Where the map breaks down
Manual location tracking fails in three predictable places. A car gets moved by someone who is not the person holding the tablet. A stall gets double-assigned during a busy intake. And a vehicle that came in without paperwork never gets entered at all, so it exists on the yard but not in the system.
A shared lot inventory app closes the second and makes the first visible. In Auto Lot Finder every worker records the move on the phone in their pocket, the whole team sees the same Lot Map live, and staff search by VIN, stock number, or make and model instead of walking rows. The third failure, a car nobody entered, is still solved by discipline at the gate.
Yards that want cars to move on the map without anyone tapping can add receivers, which is optional hardware you buy and mount yourself: each one listens for the tire-pressure sensors of the cars entered at intake and moves a car to its zone. Without receivers nothing moves by itself. The setup guide covers how many you need and where to put them.
Put the whole yard on one Lot Map
Auto Lot Finder records every car at intake by its VIN, keeps it in a zone, and lets the whole team find it again on a phone or the office computer.
More guides: Work & create · all Adelyons guides